Indalum
Euroalum, Traditional and facade: eight European series and four envelope systems.
Why we use it
Indalum, founded in 1978 and part of Grupo Industrial LM, extrudes aluminium profile with its own anodising plant and electrostatic paint line. Its catalogue splits three ways: the Euroalum line, eight European series running from a bathroom window to a full-span slider; the Traditional line, organised by profile depth in inches and aimed at housing; and the facade systems, from mechanically retained curtain wall to unitised and ventilated facades.
Key features
- Eight Euroalum series, from the 2000 to the 4500
- The Euroalum 4000 is the only one in the line with tilt-and-turn
- Traditional line by profile depth, from 1 1/2″ to 4 1/2″
- Four facade systems, unitised among them
- In-house anodising and electrostatic painting
Indalum lines
Euroalum
8 series- Projecting
Euroalum 2000
Projecting and casement for small openings.
- Casement
Euroalum 2500
The base European series: seven opening types on one profile.
- Sliding
Euroalum 2800
90° mitre slider with an integrated insect-screen guide.
- Door
Euroalum 3500
Casement door with a bottom rail up to 152 mm, commercial and residential.
- Sliding
Euroalum 3800
90° mitre slider with high-performance hardware.
- Sliding
Euroalum 3900
Sliding door for large leaves and coastal exposure.
- Tilt & turn
Euroalum 4000
The most complete series: tilt-turn, hopper, sliding and projecting.
- Sliding
Euroalum 4500
Large-span slider with multiple leaves on two, three or more tracks.
Traditional line
4 seriesFacade
4 series- Curtain wall
Fachada integral · sujeción mecánica
Curtain wall with the glass held mechanically by beads and caps.
- Curtain wall
Fachada integral · sujeción química
Curtain wall with structurally bonded glass and no visible cap.
- Curtain wall
Fachada unitizada
Modules assembled and glazed in plant, ready to lift.
- Curtain wall
Fachada ventilada
Envelope with a ventilated air cavity behind the cladding.
