Extrusiones Metálicas
Línea Española: standard and thermal-break series.
Why we use it
Extrusiones Metálicas is our main aluminium profile supplier, and its Línea Española catalogue is the basis of much of what we fabricate. It splits into two families: the standard series, solid profiles with no thermal break, and the RPT series, which carry a polyamide separator between the inner and outer faces of the profile. That barrier is the difference between a frame that conducts outside heat and one that does not.
Key features
- Two families in one catalogue: standard and thermal break
- Four RPT series: 2400, 2500, 4600 and 6500
- Up to 25% energy saving on the RPT series against their cold equivalent
- Shared finish range: lacquered, anodised and wood-effect
Extrusiones Metálicas lines
Thermal break
4 seriesProfile with a polyamide separator between the inner and outer faces. It cuts frame condensation and air-conditioning load.
Standard aluminium
9 seriesProfile with no thermal break. The right option when insulation is not the project's driving criterion.
- Sliding
Serie 3500
Light slider for housing and refurbishment.
- Sliding
Serie 3600
General-purpose slider, the most fabricated in the catalogue.
- Sliding
Serie 4600
Large-format slider, without the thermal break.
- Sliding
Serie 7000
Reinforced slider for wide openings.
- Sliding
Serie 8500
Heavier-section slider for intensive use.
- Sliding
Serie 10000
The largest-format slider without a thermal break.
- Casement
Serie 1400
The catalogue's base casement series for doors and windows.
- Casement
Serie 4000
A recent addition to the casement catalogue.
- Casement
Serie 6000
Heavier casement, the cold equivalent of the 6500 RPT.
